The 'Micky Ha Ha' Power Point Safety Cover is, by far, our most popular product.

• It stops children having access to plugs and power points, whether in use or not.
• The clear rounded design allows you to see whether the power is on or off, without removing the cover.
• The base fits snuggly around the power point and the top cover clips onto the base with two child-resistant catches.
• Appliance cords are directed out through slots in the cover.     
• The cover can be turned so cords can be directed out from either the top or bottom.
• Also ideal for workshop areas where dust, dirt, sparks etc. are a problem. The safety cover protects the power point and stops accidental unplugging.

Dimensions

• Designed to cover a double power point (with two power outlets).
   
• The area that goes over the power point is 14cms width x 11.5cm height.
   
• When installed, the Micky Ha Ha Power Point Safety Cover protudes out from the wall by approx 10cm.
   
• The Micky Ha Ha Power Point Safety Cover allows for an electrical plug up to 7cm inside the closed cover (this is in addition to the actual power point outlet protuding from the wall by approx 1 - 1.5 cm).

Installing the 'Micky Ha Ha' Power Point Safety Cover

• There are two adhesive strips located on the top and bottom of the base. To attach, simply peel off the outer tape cover and firmly press onto a cleaned and dried flat surface. The adhesive increases in strength over 24 hours so minimal handling at first is recommended.

• For more permanent installation, there are two locating holes in the top and bottom of the base to screw into wall, allowing just the top cover to be clipped on or off, as needed.